10 Amazing Features that Make shootcase® the Best Photo Booth Shell You Can Buy
The shootcase®
Exploded view of shootcases unique lighting system in detail.
Studio strobe/flash based lighting system and unique enclosure create beautifully soft, clean and clear images every time, Any venue.
1. Soft Box Lighting System
-Built in soft box for true studio quality results.
-Internal flash, Keep the magic hidden. No ugly lights stuck on top.
-High power flash overpowers any venue lighting to produce ultra consistent, beautiful images in any space.
-Flash lighting system freezes movement with shutter speed at 160th of a second.
-Powerful enough to shoot at at F16 and 400ISO for super sharp images front to back even with staggered groups of people.
-Beautifully soft is diffused twice and bounced as much as possible before leaving the shootcase giving the most even, softest lighting possible from a photo booth with incredibly low 'fall off'.
A short video showing the branding possibilities with shootcase®
The clear perspex cover gives simple paper graphics a premium glossy finish.
Two example paper graphics framed within the two piece rear panel.
2. Easy Brand System
-Uses paper simple paper or vinyl graphics cheap to produce.
-Artwork can be rolled up and stored easily.
-Once created your branded photo booth graphics are re-usable and can be changed in minutes.
-No need huge panels printed by specialist companies to re-brand a photo booth. Or worse still semi permanent, messy and expensive vinyl wraps.
-Quickly change the look of the shootcase between jobs with no wasted time, expense or mess of applying stick on branding.
276 colour changing LED's illuminate the front panel of the shootcase® allowing you to define custom colours to change the look of the photo booth in seconds.
3. On board LED's
-The shootcase® chassis ships fitted with 276 LED's fitted and LED controller wired up and ready to go.
-The LED's are controlled by an infra red remote supplied with your kit, The remote can be stored inside the chassis using the keyboard holder supplied.
-The LED's function as a 'modelling light' to provide illumination for the live view in dark venues.
-The LED's can be set to almost any colour using the remote illuminating the front panel of the shootcase®. This allows you to change the look to suit your clients event theme or brand quickly and at no cost.
-The set up can be adjusted to flash or fade between pre-set colours, The speed of the flash is controlled by remote allowing you to quickly adapt the look of the shootcase to suit your requirements.
The shootcase® ships with an international IEC power supply installed, No wiring needed!
4. Switched inlet and IEC based power supply
-The shootcase® ships with an international IEC power supply installed that works worldwide.
-More compact than domestic 8 way plug sockets typically used in other booths which are not suitable for commercial application.
-8 Sockets for superb flexibility.
-Comes with 7 x IEC to IEC leads which are the prefect length for shootcase® for neater cabling and lower weight.
-Switched and fused power socket on base allows you wake your shootcase® with just one flick of a switch.
-Spare fuse carried within the power switch.
Mitsubishi dye-sub print hidden out of sight behind lockable panels with internal print catchers.
The standard printer panel supplied with every shootcase® can handle both 2x6" and 4x6" prints.
5. On board printer compartment
-On board printer compartment fits a variety of Mitsubishi and DNP printers.
-Printers can be secured by straps provided and left installed during transportation or removed through the printer door without any tools.
-The lockable printer doors feature a standard internal print catcher for 2x6 (5x15cm) and 4x6” (10x15cm) prints.
-Keeping both the printer and the print catcher inside the photo booth case avoids the need for additional stands. The set up is kept clean and visually un-cluttered with just one power lead outside the photo both case.
-Ugly printers are hidden from view and the 'magic' of the phootbooth is preserved.
-Ergonomic design. Prints exit 1M or 3Ft from the floor level right on the side of the booth.
The shootcase® is it's own case. No bulky flight cases or trolleys needed. Click the video to see how we roll!
Completely tool free set up, No tools to loose!
6. Simple set up.
-Compact dimensions of just 93cm H x 56cm W x 32cm D or 36” x 33” x 12.6” can fit in most car boots or trunks very easily.
-The shootcase® is it's own case. No bulky flight cases or trolleys needed.
-Set up in less than five minutes by a single person.
-Completely tool free set up, Nothing to loose!
-LED remote and Mini Keyboard stored safely inside.
-All components securely mounted. Nothing needs to be installed or adjusted at the venue so you can get in and out quickly and with no fuss.
-The set up can wake automatically with the power switch. No need to open the shootcase® on site.
Each shootcase® ships with 6 external connectivity ports installed that connect directly with your PC inside the photo booth case.
The photo booth case has HDMI, USB and RJ45 connections on the underside.
7. Enhanced connectivity.
-Each shootcase® ships with 6 external connectivity ports installed that connect directly with your PC inside the photo booth case.
-Upper and lower HDMI ports can be used for connecting external displays such as TV's for slide shows.
-Upper and lower USB ports useful for saving images directly to USB sticks for your clients, Connecting mobile internet dongles, additional printers and many other USB devices.
-Upper AUX audio in port for connecting professional video mics to your DSLR to capture high quality sound.
-Lower RJ45/Ethernet port for creating a hard wired internet connection.
The standard panel can be replaced to add additional functionality to your photo booth shel quickly and easily. Shown here are our iPad housing to create and on-board social media kiosk, A cashless system and a coin acceptor.
See your shootcases capabilities expand in this short clip.
8. Expandability
-Every shootcase is supplied with a standard expansion panel which allows you to access the keyboard holders or other accessories inside the photo booth.
-The standard panel can be replaced to add additional functionality to your photobooth quickly and easily.
-We currently offer three optional panels, An iPad housing to create and on-board social media kiosk, A cashless system and a coin acceptor.
-The system is designed to allow us to keep your photobooth up to date with the latest developments by adding new technology into your existing shootcase chassis.
Just one of the many design details built into each shootcase® to keep your photo booth cool under pressure.
9. Active cooling
-The shootcase® ships fitted with two large extraction fans expelling 100 - 200 m³/h of warm air from the top of the chassis
-Passive air intakes hidden on bottom of the chassis to draw cool whilst preserving the clean lines of the lines of the design. The intakes location causes cool air to pass through the entire chassis keeping your components performing at their best.
-Kit chassis also has two smaller fans dedicated to cooling the flash enclosure.
Our shootcase® chassis kit.
10. Do it your way
-The chassis accepts a wide range of cameras allowing you to fit almost any DSLR to suit your specification.
-The camera position and angle is adjustable to allow you to dial in your perfect set up.
-Flash is powerful enough to give excellent results at long range allowing you to capture huge ground shots.
-Kits supplied with 3 fixed camera mounts, 2.5, 5 and 7.5 degrees.
-Portrait camera mount available.
-The shootcase® can accommodate four different printers from two of the leading dye sub manufacturers.
-The spec and build cost can be altered to suit your needs. If you plan to do a lot of video work or use advanced filters with face swapping you will need far more computing power than any tablet can provide. For example our demo shootcase runs an i7 processor with 16GB or RAM and an SSD hard drive. It's able to complete to most complex of photo booth operations in blazingly fast.
For more information on exactly what fits please visit http://shootcase.com/article/how-to-build-your-own-DIY-photobooth-using-the-shootcase-photobooth-shell-package/
To get a feel for what your completed shootcase photo booth case can do check out our video content here.

We ship the shootcase® worldwide. Get a quote and order yours today!
Recent blog posts
How To Build a Hashtag Print Station Using the Shootcase®
22.01.19
How To Build a Hashtag Print Station Using the Shootcase®
Convert your shootcase into a hashtag printer. Hashtag printing allows guests at your event to instantly print and display their own photos by simply using your hashtag when they upload them to Instagram or Twitter. Instead of using the shootcases camaera they use their own smartphones to captrue the event.
Available Now - The Shootcase® S4 With Magic Mirror Capability!
25.10.18
Available Now - The Shootcase® S4 With Magic Mirror Capability!
Get ready for the shootcase® S4! This article introduces just a few of the S4's new features! The industry first magic mirror conversion. The revised base with stealth cabling, Weld free construction and the new active LED lens surround.
New for 2018, Introducing the shootcase® S3!
19.01.18
New for 2018, Introducing the shootcase® S3!
The shootcase® S3 is the latest shootcase evolution from the worlds most innovative portable photo booth manufacturer. Our class leading chassis is now 25% lighter and easy to work on too thanks to the completely tool-less design. The shootcase® now works with the Microsoft Surface tablet PC's as well as ELO touch screens. The chassis can now mount almost any mini PC securely using it's new VESA mounting system. Convert your shootcase into a hashtag printing station in seconds and create a new offering for your clients in seconds!
Shootcase Showcase - Customer Review From Ray Arya, Memobox Photo Booth, Austria
19.01.17
Shootcase Showcase - Customer Review From Ray Arya, Memobox Photo Booth, Austria
Shootcase talks to uber-talented graphic designer, photographer and now photo booth owner Ray Arya, Founder of the Austrian based photo booth company Memobox Photo Booth. Ray gives us the lowdown, a review of his shootcase® and a peek at selection of the super cool images he's captured so far!
Internationally published photographer Sean Hawkey Selects shootcase®!
06.01.17
Internationally published photographer Sean Hawkey Selects shootcase®!
We're thrilled to announce internationally published documentary photographer Sean Hawkey has selected shootcase to undertake a unique global photo booth photo art series. The first project of it's kind, Sean will be packing his shootcase and racking up thousands of miles travelling the globe capturing photo booth portraits is the most unusual and extreme locations.
Shootcase Showcase - Customer Review From OH MY BOOTH! Australia
06.12.16
Shootcase Showcase - Customer Review From OH MY BOOTH! Australia
Shootcase catches up with June Tan, Owner of the fabulously creative Melbourne based photo booth company OH MY BOOTH! June gives us a quick overview of her company and a review of the shootcases.
New: shootcase® free photo booth stock image library with every purchase!
09.11.16
New: shootcase® free photo booth stock image library with every purchase!
Every shootcase is shipped with a unique free photo booth stock image library designed to give your business the edge from the word go! Find out more about this fantastic free resource!
How to Build Your Own Photobooth Using the shootcase® DIY Photobooth Case / Shell
15.07.16
How to Build Your Own Photobooth Using the shootcase® DIY Photobooth Case / Shell
If you're on a budget, Have your own camera or printer you'd like to use or even just like to tinker our versitile chassis kit is the right option for you. Our shootcase® chassis kit is more than just the bare bones. The Photo Booth case ships fully assembled and the package includes a huge array of components to help you create your ultimate photobooth.
The shootcase® 6x4+ Printer Panel For Large Format Photobooth Prints
14.07.16
The shootcase® 6x4+ Printer Panel For Large Format Photobooth Prints
Make the most of your shootcases class leading image quality and go big! This printer panel can be fitted to any shootcase® S2 Photo Booth shell in place of the standard printer panel. The standard door works with both 2"x6" strips and 6"x4" prints only. This additional panel allows you to create gorgeous prints from 6" x4" up to 6" x9" and everything in between including the super cool square 6"x6" format for that instagram look.
How to Create a Coin Operated Photo booth with shootcase®
16.06.16
How to Create a Coin Operated Photo booth with shootcase®
Our coin reader expansion panel opens up the possibility of accepting cash payments for each photobooth session. The system is supplied with exclusive software that allows the reader to work with your main photbooth software suite. The hardware can be set up to recognise most currencies worldwide as well as tokens.
The shootcase® Slip on Photobooth Cover - Protect your Photobooth Case
15.09.15
The shootcase® Slip on Photobooth Cover - Protect your Photobooth Case
Our slip on padded cover protects your investment by stretching over the chassis for transit adding minimal weight and keeping the unit compact. The cover is hand made in the UK from durable padded material. The cover can be fitted and removed very quickly, and folded to take up very little space when not in use.
Photo Booth Social Media Station - shootcase® iPad Expansion Panel
14.09.15
Photo Booth Social Media Station - shootcase® iPad Expansion Panel
Our unique iPad expansion panel allows you to quickly and securely mount an iPad air to your shootcase® to create an on board social media kiosk.
xShootcase® is a registered trademark. Our designs are protected by law. Infringements will be persued!